ASTM B670 합금 718 플레이트

• EN 10151 ASTM B670 Alloy 718 strip for springs
• EN 10258 (formerly DIN 59381)
• EN 10088 ASTM B670 Alloy 718 strip (general)

• ISO 15510
• EN 10051
• EN ISO 18286
• EN 10088-1
• ASTM A 480
• EN ISO 9445
• ASME IID
• ASTM A 959

1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm

• Hot rolled 718 Inconel Plate 3.0–10.0 mm
• Cold rolled 718 Inconel Plate 0.5-6.4 mm

• Width: Up to 500 mm (19.5 in)
• Thickness : 8-100 microns (0.00031-0.004 in)
• Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns.

To provide a full profiling service in India we use numerous profiling methods including:

• Plasma Plate Cutting
• Laser Plate Cutting
• Oxy-propane Flame Cutting

• Blanking
• Slitting
• Cut-to-length
• Polishing

• Alloy Inconel 718 Clad plate: Alloy Inconel 718 Clad plate is a composite steel plate made by bonding UNS N07718 Inconel 718 plate, etc.
• 718 Inconel Sheet: material under 3/16" [5.00 mm] in thickness and 24" [600 mm] and over in width;
• ASTM B670 Alloy 718 Plate: material 3/16" [5.00 mm] and over in thickness and over 10" [250 mm] in width;
• ASTM B670 Alloy 718 Strip: cold-rolled material under 3/16" [5.00 mm] in thickness and under 24" [600 mm] in width.

• Tested to ASTM A923 Method "C" or ASTM G48 Method "A".
• EN 10204 3.1
• Free sample(not included freight)
• Free quote
• Mill Test Certificate is supplied with shipment.
• Other Relevent Test
• Any third party inspection is accepted.